Usually ships within 7-14 days.

Please remember that the delivery of your order is the responsibility of the shipping carrier (USPS, FedEx, DHL). 

Once a package leaves our fulfillment center, you must reach out directly to the shipping carrier selected during checkout to resolve delivery issues. You should have your tracking number ready when reaching out to the shipping carrier.

Glance clock is bright enough so you can see information clearly during the daytime or in the evening. It has a light sensor and can dim the screen brightness depending on ambient light.

Glance clock is ~9in (227mm) in diameter, ~1in (29mm) thick, and weighs 420g

The main power supply is 5V/1.5A USB adapter. You can connect Glance clock to a power source by 3m (10ft) cable provided in the box. You can leave the cable plugged in all the time while using Glance clock.The clock also has a backup battery to keep clock fully operated for at least two (2) days. This time depends on your usage pattern, the less you use the clock, the longer the battery life.

• Before turning on your Glance clock download the latest Glance App from the App Store
  
• After unboxing we recommend connecting your Glance clock to a power source using the power adapter and cable that comes in the box. 
• Now you can turn on your Glance clock. You will see a "Hello" message on the display of your clock.
• Once you see that animation on the clock, you can put the clock aside and launch the app.

• Follow instructions in the app to pair the clock with your mobile device.
  
• When the pairing process is complete, please, wait for clock hands to finish moving. 
• When the clock hands stop moving, check that your clock shows the same time as on your mobile device. If not, please refer to the Troubleshooting section below.
• The app should offer to update Firmware. Please, update the firmware.
• Once the firmware is updated, your Glance clock will restart.
• Now you are up-to-date. 

If you set any app in "as a clock face" mode on your Glance, information will be on the screen for max 30 min after the connection with a phone has gone. The information will come back within 15 minutes after the connection with the phone is back. 

All notifications are in real time, so there will be no notifications if the connection with the phone has been lost.

If you set a timer or have an alarm clock, Glance will alert you when the timer ends and will alarm at the selected time even if the phone is not present.

Glance shows time and date regardless if a phone is present. The clock has a presence sensor so it shows information only if somebody is present.

Glance is not always connected to your phone. Your phone connects to your Glance at the moment the information is ready to be displayed or updated on the clock face. At the rest of the time, your Glance is disconnected from your phone. 

Yes, you can adjust the brightness of your Glance's display in the Settings menu in the App. Glance also has an automatic brightness feature that automatically adjust its brightness according to the ambient light level. 

You can enable Silent mode in Settings of the Glance app. The Silent mode mutes all sounds from your clock. It will display all notifications and animations but without any sound.

Yes, Glance clock has the do not disturb feature. Do not disturb mode has two options:

• permanently block all notifications ("Do Not Disturb")
  
• block all notification by defined schedule ("Scheduled")
  

Night mode activates a digital clock that you can see at night when the hands are not visible. In Night mode all integrations that set up As a clock Face (ACF) are disappeared, the sound is muted, but notifications will still be displayed.

No, you can not adjust volume of Glance clock.

It depends on how many notifications you get. If you turn on dots/date/time or any app in "as a clock face" mode, the clock can run a few days without power source connected. Once the battery reaches a certain battery level, you will get notified via App in the following sequence: 

• < 50% threshold - push notification “Your clock reaches 50% battery level. The display has been dimmed more” + no in-app banner 
  
• < 25% threshold - push notification “Your clock reaches 25% battery level. The display and sound have been switched off” + in-app banner 
  
• < 10% threshold - push notification “Your clock reaches critical battery level. Please charge immediately” + in-app banner
  

There are three ways how to switch off the alarm:

• There is a pop-up message on your phone at the moment the alarm is ringing. If you tap it or swipe on the lock screen it will open the Glance App and switch off the alarm. 
  
• You can shortly press the side button on your Glance and the alarm will go off
• The sound will automatically go off in 1 min if you don't do anything

The private mode is required to receive calls because of iOS architecture. A Bluetooth accessory should continuously be connected to a phone to display calls and notifications from a notification center. Sorry, Apple developed iOS in this manner, we can't overcome it.

If you would like to see calls on Glance clock you need to switch it to the "private" mode. In this mode, the clock will display information and notifications only from your account.

If you want to share your clock with someone else, you should not use the "private" mode, and all other integrations will work for both of you.

If you activated the "private" mode and want to disable it, please switch it off in the Glance App then go to your phone Settings > Bluetooth and find "Glance clock_xx" there. Please go back to the Glance app, the app should show you a window to enter the 6-digits code that will be displayed on the Glance clock face. 

NOTE: You need to activate (switch off and back on) the private mode after updating Glance App.